THDP-3 Parts Motor for THDP-3 Single Punch Pill Press
For the motor for the Tablet Press we looked for a supplier that had a name for quality. Motor available in 110v or 220v for the Europe or the USA. Supplied in single phase we are also able to supply this motor or indeed the press at special request in 3 phase.
We have picked a 4 pole, 1 horsepower motor with a strong starter cap for immediate starting torque to get your press instantly up to speed.
Before removing this part it is wise to turn off and unplug your machine as well as loosen the bolts on the Motor Support Arm to remove the tension from the V-Belt.
Firstly, unplug the machine and allow the capacitors a moment to discharge before you open up the motor to unwire it.
Open the box on the side of the motor. For ease take a photo of the wiring configuration inside so that you can wire the new motor easily. Remove all of the wires from there current fittings by loosing the screws on the top.
Next unscrew the old motor from the bace by undoing the 4 bolts and nuts that hold it in position. This will release the old motor from the base.
Next you will need to remove the pulley from the shaft. This can be tricky. The best tool to use is a 3 armed puller, if you do not have one of these you can try and work it off using a crowbar or a flathead screwdriver.
Finally repeat the process in reverse to install the new motor.
TDP Spare parts for all kinds of pill press machines are proven effective and safe by our rigorous quality control testing procedure.
Motor Spare parts is different for different pill press machine of TDP-1.5 TDP-5 TDP-6 THDP-3 THDP-5 THDP-6 :
In order to make sure you get the correct Motor, please inform seller the machine you have, thank you so much.
We have all parts of single punch tablet press,please leave me message if you need to purchase other accessories together.
All of our parts are new and shipped rapidly to you. Also these particular parts come with 3-Month warranty, there's also a 100% money back guarantee if you are not satisfied with our service. We provide quick delivery on all of our machine parts.
Purchase TDP parts right away and you'll not be disappointed.
If you have any requirements or question, please feel free to let us know and we would come to you in the shortest time
This part is easy to be replaced according to our installation videos, we would help our friends how to change it and make your TDP machine work normally .
1. Spare Parts Packages would be sent out within 10 hours, and meanwhile its pictures would be sent to you within 10 hours ;
2. Tracking numbers would be given to you within 24 hours .
3. We cover the whole loss if spare parts lost in the Customs
You will instantly be able to see the superior quality.
All of our parts are brand new and delivered rapidly to you.
4. We can make sure you can receive your spare parts in 8 - 13 days after shipment :
∈ I would give you a good offer too if you are interested to buy pill press machine or you are interested to buy a upgraded electric pill press machine in the future.
| Item |
TDP-0 |
TDP-1.5 |
TDP-5 |
TDP-6 |
| Max pressure of tablet |
15 KN |
15 KN |
50KN |
60KN |
| Max diameter of tablet |
12mm |
15mm |
16mm |
25mm |
| Max filling depth |
11mm |
11mm |
12mm |
18mm |
| Max thickness of tablet |
6mm |
6mm |
6mm |
10mm |
| Production capacity |
2500-3000pcs/h |
5000-5500pcs/h |
4000pcs/h |
3600pcs/h |
| Motor Power |
MANUAL POWR |
550w 1400r/min |
750w 1400r/min |
1100w 1400r/min |
| Overall dimension |
360x280x450mm |
700x 370 x800mm |
700 x400 x800mm |
850 x450 x800mm |
| Weight |
24kg |
60kg |
120kg |
180kg |
Q: Could you teach me how to replace the spare parts I am going to buy from your company ?
A: We could offer instalaltion videos to teach you how to replace the pill press spare parts
Q: Which Pill Press Machines are in stock ? I need quick delivery after my payment if we need one pill press in the future .
A: All different Models of Tablet Press Machines are in great stock, we can do shipment quickly within 24 hours .
Q: Can you customize the pattern and shape of the tablet press mould according our requirements? and how long you can prepare well in general ?
A: Yes, we can make various shapes and patterns according to the requirements of our customers. The Customized mould needs around 3-5 days production .
Q: Do you have some different tablet press moulds for my choice, and how much ?
A: Yes, we have many kinds of tablet press dies for our customers' choices, no need to wait for the production, they are available and each kind has different price, you can contact us for their pictures and prices .
Q: Can the machines be customized for different voltages and plugs from different countries if one day when I need an aotumatic pill press instead ?
A: Yes, according to our customers requirements : customized 110V,220V,380V; American plug, British plug, European plug and so on .
){kind=link}