Sugar Coffee Bean Spice Rice Grain Pepper Mill Milling Grinder Stainless Steel Grinder
This stainless steel grinding machine is suitable for powdered pepper, star anise, cumin, cinnamon, dried chili, fresh chili, monosodium glutamate, salt, white sugar, rock sugar, chicken essence, monosodium glutamate, citric acid, glass, chemical raw materials, grains, medicinal materials, seasoning liquid sauces , soaked and drained rice, fresh corn, bean paste, puffed food, urea, powder metallurgy, freeze-dried raspberries, freeze-dried meat, ground peanuts, tea, wheat, pepper, some plastics, puffed food, etc.
The crushing machine uses the relative movement between the active fluted disc and the fixed fluted disc to impact, grind and crush the target materials. The size of granules can be achieved by changing of the screen. The machine has the features of easy structure, solid, stable running and good efficiency.
The crushed material is discharged directly from the grinding chamber of the main frame. In addition, the whole machine is made of stainless steel, with smooth inside walls to avoid powder accumulation on the inside walls. Those harm aceutical, chemical and food stuff products from the machine are in accordance with national requirement.
The universal crusher uses a toothed disc high-speed rotating knife, a fixed knife impact and shear grinding crushing.
The crushing effect is good, the heat of the crushing chamber and the finished product flows out of the sieve through the strong airflow generated during crushing, and the crushing fineness can be determined by different sieves.
Crushing material: Suitable for crushing fibers, rhizomes, medicinal materials, Dendrobium officinale, Ganoderma lucidum, Panax notoginseng, Maca, etc.
About fineness: The higher the fineness base of the crusher, the better the performance of the machine, the larger the unit, the finer the powder.
Range of application: Family, clinic, Chinese pharmacy, mill, beauty spa, restaurant, laboratory, etc.
About milling: Can only crush dry materials. Oily, viscous and wet materials should not be crushed.
| Model |
GD-18B |
GD-20B |
GD-30B |
| Power |
2200W, 220V/380V |
4000W, 380V |
5500W, 380V |
| Capacity |
10-50kg/h |
15-150kg/h |
30-300kg/h |
| Discharge particle size |
20-200 mesh |
20-200 mesh |
20-200 mesh |
| Product Size |
65*75*100cm |
75*85*125cm |
80*90*138cm |
| Weight |
80kg |
150kg |
200kg |
| Spindle speed |
5800 R/MIN |
5300 R/MIN |
4500 R/MIN |
Main Features
(1). It has a wide range of applications. The whole machine is made of 304 stainless steel, which is suitable for crushing various materials. The crushing chamber is equipped with a water-cooled jacket to meet the crushing requirements of most heat-sensitive materials.
(2). The noise is low, and the collection room and dust collection room are separately configured to fully collect the dust, which can meet the user's requirements for cleanliness, and the whole machine has a good balance.
(3). Blades are installed in the crushing knife group, which increases the air flow in the crushing chamber, which can not only ensure the output, but also reduce the temperature generated during crushing. Some materials with poor fluidity and stickiness can also be crushed.
(4). Equipped with screens of various specifications to meet various fineness requirements.
(5). Easy to operate and easy to maintain.
(6). The production capacity is strong, which can meet the output requirements of most users.
(7). There are two forms with and without dust removal, which can meet the needs of different customers.
(8). Compact structure, no dead angle, easy to clean.
The mill is a type of vertical shaft impactor mill and consists of two rotating discs with pins embedded on one face.
The discs are arrayed parallel to each other so that the pins of one disk face those of the other. The substance to be homogenized is fed into the space between the disks and either one or both disks are rotated at high speeds.
Pin mills can be used on both dry substances and liquid suspensions.Pin mills are commonly use in the manufacture of
pharmaceuticals, as they can achieve particle sizes as low as a few micrometers.
The material is evenly fed into the grinding chamber by the feeding system, strongly impacted by the high-speed rotating disc.
At the same time, it is subjected to various comprehensive forces such as friction, shearing and collision between the static disc and the ring gear to grind material.
The moving disc and static disc can be combined in different structural forms according to nature of material to meet the grinding requirements of different materials.
1. Universal grinder can be widely used in chemical, food and other industries for grinding dry and fragile materials. Materials with low softening point and high viscosity are not suitable for this machine.
2. Universal grinder is used for various spices, chili, star anise, cinnamon, chili, turmeric, etc.
1. Food materials - These crushers can easily crush food materials such as vegetables, fruits, and nuts. They can also crush meat and bone materials, making them suitable for use in the food industry.
2. Plastics - Stainless steel crushers can also be used to crush plastic materials including bottles, containers, and other plastic waste. This helps in reducing plastic waste and promoting sustainability.
3. Chemicals - The strong and durable nature of stainless steel crushers makes them ideal for crushing chemicals, including fertilizers, pesticides, and other hazardous chemicals. These crushers are used in the chemical industry to prepare materials for further processing.
4. Pharmaceutical materials - Stainless steel crushers can be used to crush pharmaceutical materials, including pills and capsules. The crushers are made of high-quality materials that ensure that no contaminants are introduced into the materials during the crushing process.
){kind=link}